3D Printer Deals: Best Current Discounts on FDM, Resin, and Filament

Are Today’s 3D Printer Deals Worth It?

Today’s 3D printer deals span enclosed CoreXY machines, open-frame beginner models, and filament sales, and they are strong discounts versus typical pricing, making this a good time to buy if you have been waiting for mid-range performance at budget-level cost across multiple brands and retailers in both FDM and resin categories. My verdict: the headline offers are worth considering, especially the Bambu Lab P1S Combo and Flashforge Adventurer 5M, provided they match your experience level and project size. Multiple retailers are competing with aggressive 3D printer deals, pulling prices down on both enclosed and open-frame printers. That matters because you can now step into fast, feature-rich hardware for far less than its usual cost. If you have been hesitating over price, this round of discounts is strong enough that waiting for something dramatically better may not pay off unless you are chasing absolute rock-bottom entry pricing. Quotable: “Finding the best 3D printer deal can be tough. Fortunately, we're doing the legwork for you, regularly combing through the best deals on printers from Amazon, Best Buy, Newegg, Bambu Lab, Anycubic, and other retailers.”

Bambu Lab P1S Discounts: Solo vs AMS Combo

If you want an enclosed, fast CoreXY printer, the current Bambu Lab discount on the P1S is one of the best values in this roundup. The standalone Bambu Lab P1S is on sale for USD 399.99 (approx. ₱22,400), saving USD 300 (approx. ₱16,800) off its USD 699 (approx. ₱39,100) MSRP. This price matches the historical low for the P1S and has been seen several times, so it is a proven, not fleeting, floor. In exchange, you get automatic bed leveling, beginner-friendly presets in the slicer, a semi-assembled setup that can be ready in about 15 minutes, and a fully enclosed chamber suitable for higher-temperature filaments. The standout deal, though, is the Bambu Lab P1S AMS Combo at Best Buy. It is offered for USD 499.99 (approx. ₱28,000), down from its typical USD 599 (approx. ₱33,500), plus two Tough+ filament spools valued at USD 24 (approx. ₱1,300) each thrown in for free. That delivers USD 147 (approx. ₱8,200) in total savings. The AMS holds up to four spools for multi-color or multi-material prints, and the printer itself offers a 256 × 256 × 256 mm build area, up to 500 mm/s print speed, automatic bed leveling, vibration compensation, a built-in camera, and filament runout detection.

Budget 3D Printers: Flashforge Adventurer 5M and Wider Entry-Level Sales

For budget 3D printers, the Flashforge Adventurer 5M is the standout deal for beginners who want speed without a high price tag. It is currently on sale in the official store on AliExpress for USD 154.62 (approx. ₱8,700) with free delivery after applying coupon code “SBUS23,” compared to USD 227 (approx. ₱12,700) on Amazon during a concurrent sale. According to the source, “The Adventurer 5M offers great performance at at outstanding budget price. I would say it is the best 3D printer priced below $150.” The Adventurer 5M uses a CoreXY structure, provides an open bed with roughly 8.7" cubed build volume, and can be upgraded with an enclosure kit for more controlled temperatures. It boasts up to 600 mm/s print speed, 20,000 mm/s² acceleration, and a high-flow nozzle that reaches 200°C in about 35 seconds while supporting up to 280°C for various filaments. In the broader market, there are many best budget 3D printer machines seeing discounts across brands like Bambu Lab, Prusa, Creality, and Elegoo, giving entry-level buyers more choices at lower prices.

3D Printer Filament Sale and Retailer Competition

Hardware discounts are only half the story; the current 3D printer filament sale activity also reduces the long-term cost of running a printer. There are named deals on PETG and PLA filament packs, such as Sunlu PETG knocked down from USD 24.99 (approx. ₱1,400) to USD 23.74 (approx. ₱1,330), and a two-pack of PLA Plus filament at USD 29.98 (approx. ₱1,700). These are not life-changing cuts, but they sweeten the economics if you are planning to print often. More importantly, multiple retailers are competing hard on 3D printer deals, both for enclosed units like the P1S and for open-frame or mod-friendly machines. We see direct-from-manufacturer discounts, plus sales at Amazon, Best Buy, and other e-tailers. For example, Amazon lists the Bambu Lab P1S AMS Combo at USD 549 (approx. ₱30,800), while another retailer matches USD 499 (approx. ₱28,000) but without the free filament, making Best Buy’s USD 499.99 (approx. ₱28,000) plus two spools bundle the better overall deal. If you can choose among these stores, you have room to pick the strongest offer rather than accepting the first price you see.

Buy if / Skip if

• Buy the Bambu Lab P1S Combo if you want an enclosed, multi-material CoreXY printer with AMS and free filament at a strong discount.
• Skip the Bambu Lab P1S Combo if you rarely need multi-color prints and would rather save more by choosing the cheaper standalone P1S.
• Buy the Bambu Lab P1S if you want fast, semi-assembled hardware with automatic bed leveling and a record-low price versus its MSRP.
• Skip the Bambu Lab P1S if you prefer to spend the minimum possible and are happy with a simpler, slower beginner machine.
• Buy the Flashforge Adventurer 5M if you are a new maker seeking a budget 3D printer deal with CoreXY speed and upgrade options under USD 200.
• Skip the Flashforge Adventurer 5M if you need a fully enclosed chamber out of the box and do not want to rely on aftermarket or DIY enclosures.
• Buy the filament deals if you already own a printer and want to lower ongoing costs by stocking PETG or PLA while they are discounted.
• Skip the filament deals if you are still unsure which materials you will use and do not want to be locked into early bulk purchases.